stacker6

TS Stacker

Categories: ,

If you are moving lumber at the speed of your saw, an autostacker is important for safety and throughput. The AIT TS300 stacker system is capable of stacking boards at over 300 pieces per minute, and its speed and full range of options make it easy to integrate in your operation and suitable for a wide variety of applications.

Inquire By EmailCall Now

Product Description

If you are moving lumber at the speed of your saw, an autostacker is important for safety and throughput. The AIT TS300 stacker system is capable of stacking boards at over 300 pieces per minute, and its speed and full range of options make it easy to integrate in your operation and suitable for a wide variety of applications.

Features

General

Up to 25 layers per minute, Stacks boards 3/8” to 4” thick and 24” to 72” long, Stack with or without pallet, Programmable automatic tie strip feeder (2 hoppers), Small footprint (13’ 3” L x 7’ 10” W x 10’ 6” H), Programmable on/off control for upstream equipment, Recipe storage and recall

Options

Automatic tie strip feeder (4 hoppers), Operator mezzanine for opposite side (one side standard), Powered side exit conveyor (gravity exit conveyor is standard), Extended infeeds, Automatic pallet feeder, Full layer tie strip feeder–CHEP standard

TS300

The basic TS300 Stacker System consists of an integrated infeed conveyance and layer building module, a lift module for positioning the layer on the stack, and an exit conveyor.

STACK SIZES
Minimum Maximum
Height (including pallet) 60” (1470 mm)
Width 36” (882 mm) 48” (1176 mm)
Length 24” (588 mm) 72” (1764 mm

 

BOARD SIZE SPECIFICATIONS
Minimum Maximum Variations
Length 24” (610mm) 72” (1830 mm) length cannot vary by more than +/- 1/2”
Width * 2” (50 mm) 8” (203 mm) width, including any taper, cannot vary more than +/- (board width/3)/ number of boards per layer
Thickness * 3/8” (10 mm) 4” (102 mm) Thickness can not vary more than +/- the greater of 10% or 1/16”. This includes cupping.
Tie Strip Thickness .375” (9.5 mm) 1 1/4” (38 mm) Same as board thickness.
Tie Strip Width 1” (25 mm) 5 1/2” (139 mm)
* Note: maximum allowable board bow is less than board thickness. Maximum allowable board wane is 65%. Board thickness cannot exceed one-half of the board width.

Reviews

There are no reviews yet.

Be the First to Review “TS Stacker”